Tag Archives: cannabis

The problem with hyperaccumulators

 

Plants with the capability of accumulating heavy metals above concentrations that would typically cause harm or toxicity in plants are known as hyperaccumulators. Cannabis is a well-known hyperaccumulator with the ability to remove heavy metals contaminants from soils. This characteristic is desirable for soil remediation but troublesome when cannabis is grown for consumption.

If the nutrients you use are contaminated with heavy metals, your buds will be accumulating these heavy metals, exposing those who consume them.

 

We care about heavy metals just as much as you do

Licensed producers of cannabis are required to test their finished products for heavy metal contaminants. Plant-Prod® is pleased to make heavy metal analysis results available to growers for our Plant-Prod MJTM line. When growers are aware of heavy metal levels in their crop inputs, they can anticipate potential levels within their buds.

Outsourced analysis of heavy metal concentrations:

Cannabis and Calcium

Cal Kick vs. Spike (CaMg) – When to Use Which Source of Calcium

If you’re familiar with our Plant-Prod MJ program, then there’s a chance you’re not quite sure just how Spike fits into the lineup. In today’s article we’ll put the record straight.

First, let’s talk about the need for calcium within the program. Calcium is a vital nutrient to plants and is essential for optimal growth. This element plays a unique role in maintaining the expansion and structural integrity of cell walls. It also plays a central part of intracellular signaling. Plants such as cannabis that require a robust structure to support a large mass of vegetative and fruiting growth will have a higher demand for calcium. Due to this demand, calcium is required throughout most of the growing cycle, from the beginning of the vegetative phase through to the end of the flowering phase.

How to use Cal Kick
Plant-Prod MJ Cal Kick was created with a traditional high calcium NPK formulation in mind, that was enhanced to meet the high demands of cannabis production. These enhancements include elevated levels of iron and the addition of a second chelating agent – EDDHA. Since this formulation contains nitrogen, potassium and a complete micronutrient package, it is ideal for alternating or simultaneous feeding with other growth stage specific formulations. The micronutrient package allows for flexibility in feeding styles and ensures that at no point, micronutrients are deficient. Feeding rates should be based on water analysis to avoid overfeeding calcium. For more information on the A-B system and why this formulation cannot be mixed with others, see our previous post here.

The source of calcium in Cal Kick is calcium nitrate. This relatively reactive salt compound is frequently used to buffer coco growing media to replace potassium or sodium ions with calcium in cation exchange sites.

How to use Spike (CaMg)
Plant-Prod MJ Spike (CaMg) was formulated to meet the needs of cannabis growers who desired to supplement calcium and magnesium without additional elements, such as nitrogen, sulphur or chloride. Spike (CaMg) contains chelated calcium and chelated magnesium, and nothing else. It is intended to be used as a periodic supplemental source of calcium and magnesium, in addition to the standard 5 product Plant-Prod MJ program. Due to the lack of NPK and micronutrients, this product cannot substitute Cal Kick.

The source of calcium in Spike (CaMg) is EDTA chelated calcium. This metal complex is far less reactive than calcium nitrate and cannot be used in the same way to buffer coco media. The claw-like EDTA structure surrounding the calcium ion allows it to remain in solution and be more readily available for plant uptake.

Things to keep in mind when using Spike (CaMg)

Plant-Prod MJ Spike (CaMg) is a unique product and should be used with the following in mind:

  • Curb feeding to no more than twice a week, at low rates
  • Refrain from tank mixing with other Plant-Prod MJ formulations

Plant-Prod MJ is growing

Plant-Prod is pleased to announce a new addition to the Plant-Prod MJ product line, designed specifically for the cannabis industry – Plant-Prod MJ Spike (CaMg).

This new Spike (CaMg) fertilizer is made of exclusively chelated calcium (Ca) and chelated magnesium (Mg). Cannabis requires significant levels of Ca and Mg throughout the production cycle, especially during flowering and bud formation to ensure maximum yield.

The fact that this product is formulated with only chelates makes it truly unique. Chelated nutrients are far more accessible to plants and are immediately available to the roots. Most forms of Ca and Mg are either in sulfate, chloride or nitrate forms. Due to the high amount of Ca and Mg required, there is a greater chance of salt damage when using sulfate and chloride sources. In soilless media, many sulphate and chloride based nutrients are lost through leaching before they can become available to plants. When in the nitrate form, more nitrogen is provided to the system, compromising yield potential by confusing the cannabis plant. By adding excessive nitrogen at bud and flowering stages, plants will begin to grow vegetatively, shifting the plant’s focus from flowering to leaf and stem growth. Reducing overall yields.

Plant-Prod MJ Spike (CaMg) is formulated to give you the perfect ratio that cannabis plants need, 2 parts Ca to 1 part Mg, providing precise nutrition for maximum results.

Note that this product is not compatible with other Plant-Prod MJTM products. Please consult your Plant-Prod sales representative.

For full product information, see the Plant-Prod MJ Spike (CaMg) product page.

See how this formulation fits into our Plant-Prod MJ Production Program.

 

 

Legal notice for marijuana growers: The information provided by Master Plant-Prod Inc. is designed for ethical, government sanctioned medical marijuana grow operations. Master Plant-Prod does not encourage nor condone operations that are unlawful. All operations should adhere to the laws in the jurisdictions in which they operate. Full legal statement here.

Introducing the Plant-Prod Duo-ToteTM

The new way to tote

 
Plant-Prod® provides soluble fertilizers to customers both in bags and in bulk. Customized formulations that are delivered in bulk simplify and speed up the preparation of large tanks of fertilizer solution. However, material compatibility limited the range of formulations available. This limitation is now behind us.

Our new Duo-ToteTM has two compartments which keep incompatible ingredients apart, avoiding caking and melting, and allowing the delivery of all formulations. The contents of the Duo-Tote can be released at the same time where they dissolve quickly and without precipitating. Suitable for larger growers, the benefits of the Duo-ToteTM are many:

One tote per tank – faster & easier

  • Formulated specifically for your size of tank and plant nutrition needs.
  • You need just one Duo-ToteTM per tank, which is simple to use and minimizes the possibility of operator error.
  • The Duo-ToteTM can be lifted over the tank using a hoist or forklift. The drawstring on the bottom releases the fertilizer into the tank.
  • No need to take delivery of numerous bags, each requiring time to open, lift and empty.
  • Speed up operations. Our customers report time savings of 75%.

For further details please go here.