Other Crop Production Programs

Bedding Plant

With hundreds of varieties of bedding plants, finding the right fertilizer program can be challenging. Aim for a general fertilizer program, and look to indicator plants for adjustments. Monitoring pH and EC is important, especially where a wide range of crops with different nutritional needs are grown.

Indicator plants include:

High pH Indicators: petunia, pansy, snaps, vinca
Low pH Indicators: geraniums, impatiens, marigold
High EC Indicators: pansy, snaps, vinca
Low EC Indicators: petunia, pansy

Media

A commonly used soilless mix includes peat, perlite, vermiculite, starter charge and wetting agent. The media should provide enough porosity and drainage. The pH of the media should be between 5.8 – 6 for good nutrient availability. The EC should be maintained between 0.8- 1.2 mS/cm. The media should be moist when filling planting containers and care should be taken not to compact the soil.

Fertilization

Bedding plant fertilization is dependent upon the quality of the irrigation water being used. High concentrations of carbonates and bicarbonates will cause the pH of the media to rise during plant production. Water sources should be tested prior to deciding which fertilizer to apply. Your sales representative can provide water tests to determine your alkalinity and water nutrient levels, as well as an ideal fertilizer program. Acid injection (usually sulfuric or nitric acid) is used when the bicarbonate level is above 250 ppm for growers who want a consistent feed program. When acid injection is used, Plantex® Solutions 17-5-17 Complete can be used as the general feed immediately upon planting rooted cuttings. Where Ca/Mg is low (Ca < 80ppm, Mg < 30ppm), use Plantex® 12-2-14 Cal Mag + P every third time.

If acid injection is not an alternative, rotation between acidic blends and a Cal Mag formulation is suggested. The fertilizer analysis suggested would be determined by the water sample results, but in general the following guidelines apply:

 

Water alkalinity between 75-150 ppm CaCO3 with low Ca/Mg levels:
Use Plantex Solutions 17-5-17 at 150-200 ppm N as a constant feed. Alternatively, use Plantex 20-10-20 All Purpose High Nitrate at 150-200 ppm N as a constant feed. Every second or third time use Plantex 14-0-14 Cal Mag. Monitor EC and pH during the crop.

 

Water alkalinity between 150-200 ppm CaCO3:
Option 1 – If acid injection is not being used and the Ca/Mg levels are low, use Plantex Solutions 19-8-13 Complete Plus. Every third time, fertilize with Plantex 12-2-14. If Ca/Mg levels are adequate, use Plantex Solutions 18-9-18 pH Reducer or Plantex 20-10-20. Monitor EC and pH during the crop.

Option 2 – If acid injection is being used and the Ca/Mg levels are low, use Plantex Solutions 17-5-17 on a constant basis at 150-200 ppm N. Every third time, fertilize with Plantex 12-2-14. If Ca/Mg levels are adequate, then use Plantex 20-10-20. Monitor EC and pH during the crop.

 

Water alkalinity greater than 250 ppm CaCO3:
Option 1 – If acid injection is not being used and the Ca/Mg levels are low, use Plantex Solutions 18-9-18 at 150-200 ppm N constant feed. Every third time, fertilize with Plantex 12-2-14. If Ca/Mg levels are adequate, use Plantex Solutions 18-9-18 at 150-200 ppm N on a constant basis. Monitor EC and pH during the crop.

Option 2 – If acid injection is being used and the Ca/Mg levels are low, use Plantex Solutions 19-8-13 at 150-200 ppm N constant feed. Every second time, fertilizer with Plantex 12-2-14. If Ca/Mg levels are adequate, use Plantex 20-10-20 at 150-200 ppm N constant feed. Monitor EC and pH.

Finishing

In order to maintain plant quality during shipping and sale, fertilizer rates may be reduced 2 weeks prior to shipping, or when the buds are pea sized. Plantex Solutions 15-0-20 No-Stretch® should be used at 100-150 ppm N in order to strengthen the stems and to provide supplemental micronutrients to keep the finished plants greener. If younger plants are in the same greenhouse, use Plantex Solutions 15-0-20 as a part of the rotation with your regular feed program.

Other Crop Production Programs